Used AC compressors, priced per ton
Tested, guaranteed, and available in every size from 1 to 5 ton. Because we price per ton rather than per unit, we come in well under the online sellers on anything 2019 or older — with no freight and no waiting.
From $64 per ton · Licensed FL #CAC1814992
Tell us your system
Model number or tonnage and year — we'll confirm stock and price the same day.
FL License #CAC1814992
Licensed, bonded & insured
90-Minute Arrival Guarantee
90 minutes or $100 off your repair
Locally owned
Orlando-based since 2013
30-day repair warranty
Every repair, in writing
Pricing
What will yours cost?
Pick your tonnage and find your year range. These are real prices, not a range you have to call to decode.
2. Find your compressor's year range
Why we're cheaper than the online sellers
eBay and the surplus dealers price per unit, so a 3-ton used compressor lands at $350–$450 plus shipping, and new surplus starts around $449. We price per ton, which on anything 2019 or older comes out well below that — and there is no freight, because you collect in Orlando or we fit it for you.
Why us
What you get for the money
30-day guarantee
Every unit. If it fails inside the window, we replace it — no argument.
Tested before sale
Windings checked, oil inspected, pumped down and verified. Nothing goes out untested.
Installation available
Proper evacuation to a micron gauge, new filter drier, weighed-in charge. Or collect it yourself.
Same-day collection
Stock is here in Orlando. No freight cost, no three-day wait for a shipment.
Per-ton pricing
A 3-ton 2015–2017 unit is $312. eBay is $350–$450 plus shipping. New surplus starts at $449.
Trade tiers
10% off at 5 units, 15% at 10, custom pricing above 20. Contractors and property managers.
For the trade
HVAC contractors — wholesale tiers
Local stock, no freight, no counter queue. You get a direct line and priority access when inventory is tight.
5+ units
10% off
Small contractors and maintenance teams
10+ units
15% off
Growing HVAC businesses
20+ units
Wholesale pricing
High-volume — call for a custom rate
Open a trade account
Tell us roughly what volume you run and which tonnages you go through most. We'll set up pricing and let you know first when stock in your sizes comes in.
- Priority access when inventory is tight
- Consolidated invoicing for multiple jobs
- Property manager and HOA portfolio pricing
- Direct line — no waiting at a supply counter
Our stock
A sample of current inventory
Photographed as received. Stock rotates constantly — call for what's on the shelf today.
Data plates, close up
Model and serial are readable in these. Cross-check the part number before you buy — we would rather you verify than assume.
On the shelf
FAQ
Used compressors — the honest answers
Including when a used compressor is the wrong call.
Not if the rest of the system is sound and the unit is tested — which ours are. A compressor is a sealed mechanical pump; a good used one from a system that was retired for another reason will run for years. Where it stops making sense is on a system that is already 18 years old with a corroded coil, because you would be putting a good part into a failing machine. We will tell you which situation you are in.
A new compressor installed typically runs $1,200–$2,800. A used compressor from us plus professional installation usually lands well under half that. On a 3-ton system from 2015–2017, the compressor itself is around $312 against $350–$450 on eBay before shipping, or $449+ for new surplus.
A 30-day replacement guarantee on every used compressor. If it fails within that window we replace it. Warranty applies from the date of purchase and requires that the unit was installed correctly — a compressor fitted without a proper vacuum and correct charge will fail regardless of its condition when it left us.
Both. Plenty of contractors and handy homeowners collect and fit their own. We also install, which includes proper evacuation verified with a micron gauge, a new filter drier, and a weighed-in charge. Installation carries its own labour warranty on top of the part guarantee.
Often, yes. R-22 has been out of production since 2020, so used R-22 compressors are increasingly scarce and increasingly valuable — for a lot of older Orlando systems it is the only economical way to keep them running. Call and tell us your model number and we will check.
It is on the data plate of your outdoor unit, and it is usually encoded in the model number — divide the BTU figure by 12,000. If you read us the model number over the phone we will identify it for you in about a minute.
Yes. 10% off at 5+ units, 15% at 10+, and custom wholesale pricing above 20. Local stock means no freight cost and no waiting on a shipment. Property managers and HOAs replacing across multiple units get the same treatment.
Past the point of repair?
If the system is old enough that a new compressor is throwing money at it, we have complete Goodman systems in stock — 14.3 SEER2, R-32, with a 10-year parts warranty.
Know your tonnage? We probably have it.
Call with your model number and we'll confirm stock and price in about a minute.